Switch Between Modes
Easily switch between IPv4+v6 and IPv6-only network modes. When you are in IPv6-only mode, you can see the option to reset to IPv4+v6 mode. When you are in IPv4+v6 mode, you can see the option to reset to IPv6-only mode.
Switch From IPv6-only to IPv4+v6 Mode
Perform the following steps to switch from IPv6-only to IPv4+v6 mode:
- Go to SETUP NETWORK menu and press ENTER.
- Press the Down arrow to advance through the menu options. When the RESET NETWORK SETTINGS menu displays, press ENTER.
- Press the Down arrow to advance through the menu options. When the RESET TO IPv4+v6 MODE? menu displays, press ENTER to continue. Or press the Up arrow to quit this procedure and return to the SETUP NETWORK menu.
Switch From IPv4+v6 to IPv6-only Mode
Perform the followings steps to switch from IPv4+v6 to IPv6-only mode:
- Go to SETUP NETWORK menu and press ENTER.
- Press the Down arrow to advance through the menu options. When the RESET NETWORK SETTINGS menu displays, press ENTER.
- Press the Down arrow to advance through the menu options. When the RESET TO IPv6 ONLY MODE? menu displays, press ENTER to continue. Or press the Up arrow to quit this procedure and return to the SETUP NETWORK menu.