Check vApp Package Deployment Properties
Use the following command to check vApp package deployment properties:
# ovftool qVSA-1.2.3-4.vApp.ova OVF version: 1.0 VirtualApp: false Name: Qualys Virtual Scanner Appliance Version: 1.2.3-4.vApp Full Version: qVSA-1.2.3-4.vApp Vendor: Qualys, Inc. Product URL: http://www.qualys.com/docs/qualys-virtual-scanner-appliance-user-guide.pdf Vendor URL: http://www.qualys.com Annotation: Qualys Virtual Scanner Appliance - VMware vSphere vApp, build:qVSA-1.2.3-4.vApp Download Size: 1.26 GB Deployment Sizes Flat disks: 56.00 GB Sparse disks: 1.26 GB Networks Name: LAN Description: The LAN interface services all network traffic unless the (Enable WAN Interface) property is selected. If (Enable WAN Interface) property is enabled, only scanning traffic is routed through this interface. Name: WAN Description: The WAN interface is used to service management traffic (software updates and health checks) if the (Enable WAN Interface) property is selected. Virtual Machines Name: Qualys Virtual Scanner Appliance Operating System: rhel7_64guest Virtual Hardware: Families: vmx-07 vmx-08 vmx-09 Number of CPUs: 4 Cores per socket: 1 Memory: 8.00 GB Disks Index: 0 Instance ID: 5 Capacity: 56.00 GB Disk Types: SCSI-VirtualSCSI NICs Adapter Type: VmxNet3 Connection: LAN Adapter Type: VmxNet3 Connection: WAN Properties Key: Personalization_Code Category: Application Label: Personalization Code Type: int(0..99999999999999) Description: A personalization code is required to power on and activate this virtual scanner. You received this code when you provisioned the virtual scanner using the Qualys UI. One personalization code may be configured for one virtual scanner appliance. Value: 0 Key: Enable_WAN_Interface Category: Application Label: Enable WAN Interface Type: Boolean Description: By default, the LAN interface services all network traffic. If the WAN interface is enabled, all software updates and health checks are routed through the WAN interface, and scanning traffic is routed through the LAN interface. Value: False Key: HTTP_Proxy Category: Application Label: HTTP Proxy Type: string Description: Proxy URL format: [user[:pass]@]FQDN|IP[:port] Key: USER_DATA Category: Application Label: User data Type: string Description: Base64 encoded custom user data config string (Optional) Key: PREFER_USERDATA Category: Application Label: Prefer user data Type: Boolean Description: If enabled, prefer the platform user data for the scanner configurations over any other source like local UI Value: False Key: IPV6_ONLY Category: Network Label: IPv6 Only Scanner Type: Boolean Description: By default, the scanner uses an IPv4 addressing scheme. Checking this enables IPv6-only mode in the scanner. Please note that IPv6-only scanner mode doesn't use the WAN interface. Value: False Key: LAN_Default_VLAN Category: Network Label: LAN Default VLAN Type: int(0..4094) Description: If you connected the LAN interface to an 802.1q trunked port and need this Virtual Scanner to use VLAN tags on the LAN default network, enter the VLAN number here (1-4094). The value 0 disables 802.1q tagging. Value: 0 Key: LAN_IP Category: Network Label: LAN IP Type: IP Description: Input IPv4 or IPv6 (IPv6-only mode) address for LAN network interface. Default 0.0.0.0 or :: value here means ignore all LAN settings and use DHCP/DHCPv6 Value: 0.0.0.0 Key: LAN_Netmask Category: Network Label: LAN Netmask/Prefix Type: int(0..128) Description: For IPv4, input CIDR notation integer (Default is 24). For IPv6, input address prefix (Default is 64). Value: 0 Key: LAN_Gateway Category: Network Label: LAN Gateway Type: IP Description: Static IPv4 or IPv6 (IPv6-only mode) gateway. Value: 0.0.0.0 Key: LAN_DNS_Servers Category: Network Label: LAN DNS Servers Type: string Key: WAN_IP Category: Network Label: WAN IP Type: IP Description: Default 0.0.0.0 value here means ignore all WAN settings and use DHCP - if the WAN interface is enabled Value: 0.0.0.0 Key: WAN_Netmask Category: Network Label: WAN Netmask Type: IP Value: 255.255.255.0 Key: WAN_Gateway Category: Network Label: WAN Gateway Type: IP Value: 0.0.0.0 Key: WAN_DNS_Servers Category: Network Label: WAN DNS Servers Type: string Key: WINS_1 Category: Scanner Label: WINS 1 Type: IP Description: Configure a primary WINS address. This is used only if you are running Windows Internet Naming Service and the virtual scanner needs to use it for name resolution. Value: 0.0.0.0 Key: WINS_2 Category: Scanner Label: WINS 2 Type: IP Description: Configure a secondary WINS address. This is used only if you are running Windows Internet Naming Service and the virtual scanner needs to use it for name resolution. Value: 0.0.0.0 Key: WINS_DOMAIN Category: Scanner Label: WINS DOMAIN Type: string Description: Configure WINS Domain. This is used only if you are running Windows Internet Naming Service and the virtual scanner needs to use it for name resolution. IP Allocation Policy Schemes: dhcp ovfenv Protocols: IPv4 IPv6 References File: qVSA-1.2.3-4.vApp-disk1.vmdk
Next Step