Activate Appliance Using LCD Keypad 

To activate the appliance, perform the following steps:

 The following activation steps are applicable for QPS-01G-0100-A0.

1. Select REGISTER WITH QUALYS PLATFORM on the LCD interface.
2. Enter the 14-digit PERS CODE which you generated in Step 1 - Generate Personalization Code. Press Enter when prompted PERS CODE IS CORRECT?
3. Once activation completes, you are prompted to set a 4-digit PASSWORD. Please remember this PASSWORD. You need to enter it to unlock the configuration menu. If activation fails, you get an error message on the LCD interface.
4. The APPLIANCE NAME–IP ADDRESS message appears after the appliance successfully connects to the Qualys Cloud Platform. Do you see another message instead? Refer to the Troubleshooting section for assistance.
   The name and IP address appear as shown below
   

The name can be changed using the Qualys user interface.

The IP address is available for information purposes only. The Network Passive Sensor is remote-controlled by the Qualys Cloud Platform and does not allow incoming logins or connections from the network.

Your account's Qualys Cloud Platform indicator appears in the lower right corner.

Next Step

Set Remote Console Interface to Configure Appliance Using Serial Port